Tubular Lower Control Arms using Coilover Shocks, sold as a pair, part #CTA-79H

Global West Suspension manufactures coilover tubular lower arms for the 1967, 1968, and 1969 Camaro that allow QA-1, Afco, and Air Ride technology components to bolt directly on.

The Global West Advantage:

We redesigned the stock lower arm and installed a coilover in place of the standard spring, which installs on the top of the control arm and not from underneath. Then, we specifically designed a control arm to handle the load of a coilover application. The design of the lower arm would also clean up the appearance showing off the coilover kit. Therefore, the CTA-79H was designed.

• For coilover application only
• Doubling plates are used in the loaded areas where the shock bolts to the arm to handle the increased load being placed through the shock attachment points versus the conventional stock spring location.
• Cross tubes support the loaded shock mounting area and outside main tubes.
• The sway bar mounting plate adds support to the ball joint area.
• Straps are used around the bushing housings, strengthening the housing to the tube.
• Del-A-Lum bushings are a direct replacement for rubber or polyurethane control arm bushings. They are perfect for street or race applications. This unique design provides smooth performance without squeaks or bind. Designed to last over 100,000 miles. Whether on the street or on the track, Del-A-Lum bushings will give you optimum performance and control.
• The arms are pre-assembled
• ball joints
• bump stops

Part # CTA-79H - Lower control arms are supplied with ball joints, bump stops, and Top of the line Del-a-lum bushings. The arms are pre-assembled. New Lower arm Hardware order Part # 4003

Part # CTA-79HP - Lower control arms are supplied with ball joints, bump stops, and polyurethane bushings. The arms are pre-assembled. For more information, watch the YouTube video above.