Description
Available for
- 1967-70 Mustang
- 1968-70 Falcon
- 1966-69 Ranchero
- 1966-70 Comet
- 1967-70 Cougar
Sway bars are tuning devices and should not be considered the whole suspension. Oversized sway bars are not the answer. Suspension geometry, springs, shocks, tire and wheel combinations and driving styles all effect cornering capability and should be addressed accordingly. (Without going into detail about each component and its effect on the performance of the vehicle. We’ll stick to the basics.)
Cars with poor handling at high speeds generally have a lot of corner entry understeer. This is generally due to using too soft of a front spring rate. Large sway bars are now installed to reduce body roll and understeer. However, the vehicle will still have some understeer. So what do you do? The consensus would be to install a rear sway bar. The rear sway bar will again reduce body roll but will also reduce the amount of traction at the rear. Less traction at the rear allows the car to rotate after the apex (oversteer). The bigger the rear sway bar the less traction during corner exit you will have.
Our approach is different. We fix the geometry in the front and make the car turn into the corner, so traction isn’t reduced in the rear. Depending on the front-end’s capability, installing a rear sway bar in some cases will give the car less grip in a corner.
Tech tip: Global West Suspensions cataloging suggests sway bar usage. Suspension geometry, spring selection and components all play a part in balancing the suspension. Certain sway bars are not always required.
Enhance Your 1967-70 Mustang, Falcon, Ranchero, Comet, and Cougar with Our Front 1″ Sway Bar
Quality is at the forefront of everything we do at Global West, and our Front 1″ Sway Bar (Part Number: SB-537) is no exception. Crafted from premium materials, this sway bar is built to withstand the rigors of performance driving while enhancing your vehicle’s handling capabilities. We understand that upgrading your suspension can be a daunting task, which is why we provide comprehensive instruction sheets and engaging video tutorials to guide you through the installation process. Our dedicated customer support team is always just a call or message away, ready to assist you with any questions or concerns you may have. Whether you’re working on a classic 1967-70 Mustang, 1968-70 Falcon, 1966-69 Ranchero, 1966-70 Comet, or 1967-70 Cougar, you can trust that our products are designed to deliver exceptional performance and value. Explore more options in our Cougar 1967-1973 Suspension category, or check out our 1967-1973 Cougar Swaybars for additional upgrades. Don’t forget to browse our Cougar Falcon Suspension options to enhance your ride even further!
