1959-1964 Impala Rear Upper Adjustable Control Arm ( 9 inch Ford Rear End) part # TBC-97
Control Arms, Sway Bars, Bushings
1959-1964 Impala Rear Upper Adjustable Control Arm ( 9 inch Ford Rear End) part # TBC-97
Impala owners using a Ford nine inch rear end will need an adjustable upper control arm. Installing the Ford nine inch will require a pinion angle reset. Global West has designed a unique rear adjustable upper control arm for 1959, 1960, 1961, 1962, 1963, and 1964 Impalas (in addition to Biscayne, Bel Air, and El Camino) that makes setting pinion angle a breeze.
The curved upper arm replaces the factory unit and adjusts by rotating the internal adjuster with a wrench. The internal adjuster, located on the frame side of the arm, changes the length of the arm in or out depending on your rotation. Once you have set the pinion angle, simply tighten down the jam nuts and you are set.
The internal adjuster features 2 locking set screws and has a lubrication fitting for grease.
https://www.globalwest.netimpala-biscayne-bel-air-el-camino-adjustable-rear-upper-arm-9-inch-ford-rear-end-1959-1960-1961-1962.html
$250.60
Impala owners using a Ford nine inch rear end will need an adjustable upper control arm. Installing the Ford nine inch will require a pinion angle reset. Global West has designed a unique rear adjustable upper control arm for 1959, 1960, 1961, 1962, 1963, and 1964 Impalas (in addition to Biscayne, Bel Air, and El Camino) that makes setting pinion angle a breeze.
The curved upper arm replaces the factory unit and adjusts by rotating the internal adjuster with a wrench. The internal adjuster, located on the frame side of the arm, changes the length of the arm in or out depending on your rotation. Once you have set the pinion angle, simply tighten down the jam nuts and you are set.
The internal adjuster features 2 locking set screws and has a lubrication fitting for grease.
1959-1964 Impala Rear Upper Adjustable Control Arm ( 9 inch Ford Rear End) part # TBC-97
Impala owners using a Ford nine inch rear end will need an adjustable upper control arm. Installing the Ford nine inch will require a pinion angle reset. Global West has designed a unique rear adjustable upper control arm for 1959, 1960, 1961, 1962, 1963, and 1964 Impalas (in addition to Biscayne, Bel Air, and El Camino) that makes setting pinion angle a breeze.
The curved upper arm replaces the factory unit and adjusts by rotating the internal adjuster with a wrench. The internal adjuster, located on the frame side of the arm, changes the length of the arm in or out depending on your rotation. Once you have set the pinion angle, simply tighten down the jam nuts and you are set.
The internal adjuster features 2 locking set screws and has a lubrication fitting for grease.