Firebird 1980-81 Low Friction Front End Rebuild Kit Part # ETK-8081
Front Control Arms, Bushings and Shafts
Firebird 1980-81 Low Friction Front End Rebuild Kit Part # ETK-8081
Global West Suspension manufactures Econo-Track-Kits for the 1980 and 1981 Firebird, which are great for both street and drag race applications.
The kits are legal for many classes including the following: Stock ( also called Street), Super Street, Super Stock, Mean Street, Extreme Street, True Street, Open Comp, and any of the ET classes.
What’s Inside:
The components featured are Global West Del-a-lum bushings, offset control arm shafts, and upper and lower ball joints.
The Global West Advantage:
Del-a-lum bushings are a direct replacement and act like a bearing. Simply press out the stock bushings (including the shell) and then press in the new Del-a-lum bushings. They provide smooth movement up and down without deflecting fore and aft. The bushings reduce drag in the front end, allowing the front to raise and transfer load rapidly.
Offset shafts allow you to increase caster and still maintain camber. Why do you need more caster? Caster provides straight line stability and increased cornering ability. Well you don’t need cornering ability on a drag car but if your car is dual purpose --- you will.
Specifications for Drag Racing:
For street driving, set the front end up to the following specifications --- caster 4 degrees positive on the passenger side – driver side 3 1/2 degrees, camber 1/2 degree negative both sides (car on the ground not lifted) and set toe --- toe-in 3/32 total pushing out on the tires.
If you jumped class and can use our tubular arms, your alignment will change and be even better. Alignment specifications are included with each kit.
https://www.globalwest.netfirebird-econo-track-kit-street-drag-rebuild-kit-1980-1981-global-west-suspension.html
$575.00
Global West Suspension manufactures Econo-Track-Kits for the 1980 and 1981 Firebird, which are great for both street and drag race applications.
The kits are legal for many classes including the following: Stock ( also called Street), Super Street, Super Stock, Mean Street, Extreme Street, True Street, Open Comp, and any of the ET classes.
What’s Inside:
The components featured are Global West Del-a-lum bushings, offset control arm shafts, and upper and lower ball joints.
The Global West Advantage:
Del-a-lum bushings are a direct replacement and act like a bearing. Simply press out the stock bushings (including the shell) and then press in the new Del-a-lum bushings. They provide smooth movement up and down without deflecting fore and aft. The bushings reduce drag in the front end, allowing the front to raise and transfer load rapidly.
Offset shafts allow you to increase caster and still maintain camber. Why do you need more caster? Caster provides straight line stability and increased cornering ability. Well you don’t need cornering ability on a drag car but if your car is dual purpose --- you will.
Specifications for Drag Racing:
For street driving, set the front end up to the following specifications --- caster 4 degrees positive on the passenger side – driver side 3 1/2 degrees, camber 1/2 degree negative both sides (car on the ground not lifted) and set toe --- toe-in 3/32 total pushing out on the tires.
If you jumped class and can use our tubular arms, your alignment will change and be even better. Alignment specifications are included with each kit.
Firebird 1980-81 Low Friction Front End Rebuild Kit Part # ETK-8081
Global West Suspension manufactures Econo-Track-Kits for the 1980 and 1981 Firebird, which are great for both street and drag race applications.
The kits are legal for many classes including the following: Stock ( also called Street), Super Street, Super Stock, Mean Street, Extreme Street, True Street, Open Comp, and any of the ET classes.
What’s Inside:
The components featured are Global West Del-a-lum bushings, offset control arm shafts, and upper and lower ball joints.
The Global West Advantage:
Del-a-lum bushings are a direct replacement and act like a bearing. Simply press out the stock bushings (including the shell) and then press in the new Del-a-lum bushings. They provide smooth movement up and down without deflecting fore and aft. The bushings reduce drag in the front end, allowing the front to raise and transfer load rapidly.
Offset shafts allow you to increase caster and still maintain camber. Why do you need more caster? Caster provides straight line stability and increased cornering ability. Well you don’t need cornering ability on a drag car but if your car is dual purpose --- you will.
Specifications for Drag Racing:
For street driving, set the front end up to the following specifications --- caster 4 degrees positive on the passenger side – driver side 3 1/2 degrees, camber 1/2 degree negative both sides (car on the ground not lifted) and set toe --- toe-in 3/32 total pushing out on the tires.
If you jumped class and can use our tubular arms, your alignment will change and be even better. Alignment specifications are included with each kit.