Do you need lower control arms for autocross or street applications?The Global West Suspension G-Plus coilover lower control arms are designed to support the loads placed on the lower control arm when coilover shocks are used. This part is available with either Del-a-lum-or polyurethane bushings.
What does “coilover” mean:The term coilover is used when the spring rests on the shock body generally with a threaded adjustable collar. The collar can be adjusted up or down on the shock to adjust ride height or weight jack the chassis. No frame modifications are required. Our arms also are designed to increase header clearance around the lower arm.
- For coilover application only
- Doubling plates are used in the loaded areas where the shock bolts to the arm to handle the increased load being placed through the shock attachment points versus the conventional stock spring location.
- Cross tubes support the loaded shock mounting area and outside main tubes.
- The sway bar mounting plate adds support to the ball joint area.
- Straps are used around the bushing housings, strengthening the housing to the tube.
- Del-A-Lum bushings are a direct replacement for rubber or polyurethane control arm bushings. They are perfect for street or race applications. This unique design provides smooth performance without squeaks or bind. Designed to last over 100,000 miles. Whether on the street or on the track, Del-A-Lum bushings will give you optimum performance and control.
- The arms are pre-assembled
- Standard ball joints are used so they can be serviced anywhere.
- bump stops
Part # CTA-71H ---- with Del-a-lum bushings
Part # CTA-71HP ---- uses polyurethane bushings