View Shopping Cart" title="View Shopping Cart
Toll Free 1 (877) 470-2975

Camaro 1970-81 Tubular Control Arms Stock Spring Application with Del-A-Lum bushing # CTA-71L


1970-81 Control Arms, Bushings, Shafts
Camaro 1970-81 Tubular Control Arms Stock Spring Application with Del-A-Lum bushing # CTA-71L
The Global West Suspension tubular lower arms (for the 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 Camaro) are perfect for stock or performance suspension upgrades. Three advantages when choosing a rotating spring pocket: 1. Many people cut the coil spring to obtain a desired ride height. When you cut the spring, the spring will no longer line up in the lower arm or upper frame mount. In some cases, this can cause the spring to make noise rubbing on the edge of the pocket. Global West designed spring cushions to solve the rubbing issue. Rotating the cushion provides a way to re-index the spring. 2. The spring will be indexed properly around the coil. You will notice that most tubular lower control arms have a flat plate that the spring sits on. There really is no index. This places a lot of load at the very end of the coil spring rather than on the full coil. Over time this will fatigue the coil spring and sagging may occur. 3. Ride height adjustments can be made by shimming under the spring pocket.
  • For coil spring applications only
    • The sway bar mounting plate adds support to the ball joint area.
    • Straps are used around the bushing housings, strengthening the housing to the tube.
    • Del-A-Lum bushings are a direct replacement for rubber or polyurethane control arm bushings. They are perfect for street or race applications. This unique design provides smooth performance without squeaks or bind. Designed to last over 100,000 miles. Whether on the street or on the track, Del-A-Lum bushings will give you optimum performance and control.
    • The arms are pre-assembled
    • Steering bump stops are standard
    • Standard ball joints are used so they can be serviced anywhere.
    • bump stops
    • rotating spring cushions
    Part # CTA-71L --- uses Del-a-lum bushings Part # CTA-71LP --- uses polyurethane bushings

    https://www.globalwest.netcamaro-tubular-control-arms-stock-spring-global-west-1970-1971-1972-1973-1974-1975-1976-1977-1978-19.html
    $735.75
    Tubular Control Arms Stock Spring Application with Del-A-Lum bushing made for 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 Camaro
    Tubular Control Arms Stock Spring Application with Del-A-Lum bushing made for 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 CamaroSpring pocket for coil applicationsCamaro 1970-81 Tubular Control Arms Stock Spring Application with Del-A-Lum bushing # CTA-71L
    Click to Enlarge


    The Global West Suspension tubular lower arms (for the 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 Camaro) are perfect for stock or performance suspension upgrades.

    Three advantages when choosing a rotating spring pocket:

    1. Many people cut the coil spring to obtain a desired ride height. When you cut the spring, the spring will no longer line up in the lower arm or upper frame mount. In some cases, this can cause the spring to make noise rubbing on the edge of the pocket. Global West designed spring cushions to solve the rubbing issue. Rotating the cushion provides a way to re-index the spring.

    2. The spring will be indexed properly around the coil. You will notice that most tubular lower control arms have a flat plate that the spring sits on. There really is no index. This places a lot of load at the very end of the coil spring rather than on the full coil. Over time this will fatigue the coil spring and sagging may occur.

    3. Ride height adjustments can be made by shimming under the spring pocket.
  • For coil spring applications only
    • The sway bar mounting plate adds support to the ball joint area.
    • Straps are used around the bushing housings, strengthening the housing to the tube.
    • Del-A-Lum bushings are a direct replacement for rubber or polyurethane control arm bushings. They are perfect for street or race applications. This unique design provides smooth performance without squeaks or bind. Designed to last over 100,000 miles. Whether on the street or on the track, Del-A-Lum bushings will give you optimum performance and control.
    • The arms are pre-assembled
    • Steering bump stops are standard
    • Standard ball joints are used so they can be serviced anywhere.
    • bump stops
    • rotating spring cushions


    Part # CTA-71L --- uses Del-a-lum bushings

    Part # CTA-71LP --- uses polyurethane bushings
    $735.75
    Qty:
    Instructions
    Camaro 1970-81 Tubular Control Arms Stock Spring Application with Del-A-Lum bushing # CTA-71L
    Item #:CTA-71L__
    Availability:
    View Shipping Policy
    Only:$735.75
    Quantity:
    Instructions


    Product Description
    Product Video


    The Global West Suspension tubular lower arms (for the 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 Camaro) are perfect for stock or performance suspension upgrades.

    Three advantages when choosing a rotating spring pocket:

    1. Many people cut the coil spring to obtain a desired ride height. When you cut the spring, the spring will no longer line up in the lower arm or upper frame mount. In some cases, this can cause the spring to make noise rubbing on the edge of the pocket. Global West designed spring cushions to solve the rubbing issue. Rotating the cushion provides a way to re-index the spring.

    2. The spring will be indexed properly around the coil. You will notice that most tubular lower control arms have a flat plate that the spring sits on. There really is no index. This places a lot of load at the very end of the coil spring rather than on the full coil. Over time this will fatigue the coil spring and sagging may occur.

    3. Ride height adjustments can be made by shimming under the spring pocket.
  • For coil spring applications only
    • The sway bar mounting plate adds support to the ball joint area.
    • Straps are used around the bushing housings, strengthening the housing to the tube.
    • Del-A-Lum bushings are a direct replacement for rubber or polyurethane control arm bushings. They are perfect for street or race applications. This unique design provides smooth performance without squeaks or bind. Designed to last over 100,000 miles. Whether on the street or on the track, Del-A-Lum bushings will give you optimum performance and control.
    • The arms are pre-assembled
    • Steering bump stops are standard
    • Standard ball joints are used so they can be serviced anywhere.
    • bump stops
    • rotating spring cushions


    Part # CTA-71L --- uses Del-a-lum bushings

    Part # CTA-71LP --- uses polyurethane bushings
    Email Year Make Model We respect your privacy.
    We accept Visa, Mastercard, American Express, Discover 256bit encryption


    Copyright © 2022 Global West Suspension Components Inc.