View Shopping Cart
Toll Free 1-877-470-2975

Del-A-Lum Bushing Shackle Kit used with Caltrac Bars and Non-Caltrac Leaf Springs 1964-73 Mustang -part # 102SH*

Home  - OP  - Mustang 1967-1973  - Leaf Springs & Shackle Kits  - Del-A-Lum Bushing Shackle Kit used with Caltrac Bars and Non-Caltrac Leaf Springs 1964-73 Mustang -part # 102SH*
Home  - OP  - Mustang 1964, 1965, 1966  - Leaf Springs & Shackle Kits  - Del-A-Lum Bushing Shackle Kit used with Caltrac Bars and Non-Caltrac Leaf Springs 1964-73 Mustang -part # 102SH*

Leaf Springs & Shackle Kits
Del-A-Lum Bushing Shackle Kit used with Caltrac Bars and Non-Caltrac Leaf Springs 1964-73 Mustang -part # 102SH*
Del-A-Lum Shackle Kits: A bushing that works like a bearing! Del-A-Lum bushings are perfect for street, drag and autocross applications. Installation requires the bushing housings to be pressed into the frame and the leaf spring eyelets. Inserts and thrust washers separate the housings and springs from metal to metal contract and provide total isolation. The inserts and thrust washers also provide a bearing surface for the bushing. This design makes the bushings operate similar to a bearing. Grease fittings are installed and the housing is grooved internally for grease penetration. Del-A-Lum bushings also provide lateral control of the leaf springs. TECH TIP- When a vehicle leaves the line hard in a drag race application, the forward portion of the leaf will try to deflect inboard. This action will make the car walk sidewalks. Del-A-Lum bushings will stop the leaf from walking inboard. TECH TIP- For drag racing applications, a lot of people place a solid type bushing in the front eyelet and leave the rear bushings in rubber or poly. Do not do this!!! Rubber and polyurethane will allow the rear portion of the leaf to walk laterally. If the front bushing is solid mounted, the length of the leaf becomes a long torque arm reacting on the forward mounting point. It is trying to rip the mount out of the car. The solution is to use a Del-A-Lum shackle kit and remove the problem. TECH TIP- Autocross applications: Leaf spring bushings during hard cornering allow the rear end to move laterally. This creates a rear end tracking problem that is evident with tire rubbing and sluggish suspension response. This can also promote oversteer. NOTE: Del-A-Lum shackle kits are shipped complete with front and rear eyelet bushings, shackles, and related hardware (except where noted by an *).
http://www.globalwest.net102sh.html
$148.16
Del-A-Lum Bushing Shackle Kit used with Caltrac Bars and Non-Caltrac Leaf Springs 1964-73 Mustang -part # 102SH*
Click to Enlarge
Del-A-Lum Shackle Kits: A bushing that works like a bearing!

Del-A-Lum bushings are perfect for street, drag and autocross applications. Installation requires the bushing housings to be pressed into the frame and the leaf spring eyelets. Inserts and thrust washers separate the housings and springs from metal to metal contract and provide total isolation. The inserts and thrust washers also provide a bearing surface for the bushing. This design makes the bushings operate similar to a bearing. Grease fittings are installed and the housing is grooved internally for grease penetration. Del-A-Lum bushings also provide lateral control of the leaf springs.

TECH TIP- When a vehicle leaves the line hard in a drag race application, the forward portion of the leaf will try to deflect inboard. This action will make the car walk sidewalks. Del-A-Lum bushings will stop the leaf from walking inboard.

TECH TIP- For drag racing applications, a lot of people place a solid type bushing in the front eyelet and leave the rear bushings in rubber or poly. Do not do this!!! Rubber and polyurethane will allow the rear portion of the leaf to walk laterally. If the front bushing is solid mounted, the length of the leaf becomes a long torque arm reacting on the forward mounting point. It is trying to rip the mount out of the car. The solution is to use a Del-A-Lum shackle kit and remove the problem.

TECH TIP- Autocross applications: Leaf spring bushings during hard cornering allow the rear end to move laterally. This creates a rear end tracking problem that is evident with tire rubbing and sluggish suspension response. This can also promote oversteer.

NOTE: Del-A-Lum shackle kits are shipped complete with front and rear eyelet bushings, shackles, and related hardware (except where noted by an *).
$148.16
YEAR/MODEL: 
Qty:
Instructions
Del-A-Lum Bushing Shackle Kit used with Caltrac Bars and Non-Caltrac Leaf Springs 1964-73 Mustang -part # 102SH*
Item #:102SH
Availability:Usually ships in 5-7 business days
View Shipping Policy
Only:$148.16
YEAR/MODEL:
Quantity:
Instructions


Product Description
Del-A-Lum Shackle Kits: A bushing that works like a bearing!

Del-A-Lum bushings are perfect for street, drag and autocross applications. Installation requires the bushing housings to be pressed into the frame and the leaf spring eyelets. Inserts and thrust washers separate the housings and springs from metal to metal contract and provide total isolation. The inserts and thrust washers also provide a bearing surface for the bushing. This design makes the bushings operate similar to a bearing. Grease fittings are installed and the housing is grooved internally for grease penetration. Del-A-Lum bushings also provide lateral control of the leaf springs.

TECH TIP- When a vehicle leaves the line hard in a drag race application, the forward portion of the leaf will try to deflect inboard. This action will make the car walk sidewalks. Del-A-Lum bushings will stop the leaf from walking inboard.

TECH TIP- For drag racing applications, a lot of people place a solid type bushing in the front eyelet and leave the rear bushings in rubber or poly. Do not do this!!! Rubber and polyurethane will allow the rear portion of the leaf to walk laterally. If the front bushing is solid mounted, the length of the leaf becomes a long torque arm reacting on the forward mounting point. It is trying to rip the mount out of the car. The solution is to use a Del-A-Lum shackle kit and remove the problem.

TECH TIP- Autocross applications: Leaf spring bushings during hard cornering allow the rear end to move laterally. This creates a rear end tracking problem that is evident with tire rubbing and sluggish suspension response. This can also promote oversteer.

NOTE: Del-A-Lum shackle kits are shipped complete with front and rear eyelet bushings, shackles, and related hardware (except where noted by an *).
Email Year Make Model We respect your privacy.
We accept Visa, Mastercard, American Express, Discover 256bit encryption
E-commerce by Yahoo!
Copyright © 2018 Global West Suspension Components Inc.
Yahoo! Store by Solid Cactus