McCaster Kit -(Dirt Track/Oval Racing) part# MCF-10
Home
Ford-Mercury
Mustang 1979,1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993 
McCaster Kit -(Dirt Track/Oval Racing) part# MCF-10
Mustang 1979,1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993
McCaster Kit -(Dirt Track/Oval Racing) part# MCF-10
There is an alignment problem inherent with 1979 and up Mustangs. Outside tire wear and pulling are fairly common. McCaster kits replace the factory strut mount with a combination of plates that provide adjustability for obtaining proper alignment. McCaster kits are made out of steel and use a spherical bearing to support the strut. A welded retaining ring holds the bearing in place rather than a c-clip or spiral lock. This eliminates possible rattles from the bearing in the housing due to constant pounding from the shock. McCaster kits are designed to withstand heavy street use as well as severe dirt track and road race applications.
Note:
Autocross/Road Racing- Dirt Track/Oval
http://www.globalwest.netmcf-10.html
$178.90
There is an alignment problem inherent with 1979 and up Mustangs. Outside tire wear and pulling are fairly common. McCaster kits replace the factory strut mount with a combination of plates that provide adjustability for obtaining proper alignment. McCaster kits are made out of steel and use a spherical bearing to support the strut. A welded retaining ring holds the bearing in place rather than a c-clip or spiral lock. This eliminates possible rattles from the bearing in the housing due to constant pounding from the shock. McCaster kits are designed to withstand heavy street use as well as severe dirt track and road race applications.
Note:
Autocross/Road Racing- Dirt Track/Oval
McCaster Kit -(Dirt Track/Oval Racing) part# MCF-10
There is an alignment problem inherent with 1979 and up Mustangs. Outside tire wear and pulling are fairly common. McCaster kits replace the factory strut mount with a combination of plates that provide adjustability for obtaining proper alignment. McCaster kits are made out of steel and use a spherical bearing to support the strut. A welded retaining ring holds the bearing in place rather than a c-clip or spiral lock. This eliminates possible rattles from the bearing in the housing due to constant pounding from the shock. McCaster kits are designed to withstand heavy street use as well as severe dirt track and road race applications.
Note:
Autocross/Road Racing- Dirt Track/Oval