Toll Free 1 (877) 470-2975
1958-1964 Impala, El, Camino, Biscayne Front Big Block Springs Part # S-84 (Sold as a Pair)
Shocks, Spring, Coilover
1958-1964 Impala, El, Camino, Biscayne Front Big Block Springs Part # S-84 (Sold as a Pair)
The s-84 spring from Global West Suspension is a mild increase over the station wagon springs. It is designed to lower the car one on the lighter front ends and could drop an extra quarter of an inch on heavy front end models. We lowered the front end down this distance to get the front suspension sitting at its best geometry. Include the Global West control arm package and the front end starts to work, not to mention our power steering system that repairs the factory bump steer problem. Note: The big block spring can be used on small block applications if you are looking for more performance handling. Additional Information: Heavier rate springs (normally called "big block" springs) for Impala, El Camino, and Biscayne for 1958, 1959, 1960, 1961, 1962, 1963, and 1964 models had a rate for 400 pounds per inch. The heavier rate really was not about the engine size but more the type of body. The 400 pounds springs were standard on all 1958 models and then changed to just being available on station wagons from 1959-64. The four different rates most used are 300, 325, 375, and 400 pounds. All station wagon springs were rated at 400 pounds per inch and surprisingly all 58 models had 400 pound springs. The 1959 Impala and newer generally had 300 pound springs while Biscayne and Belair came in with 325 and 375. These rates were used for 6 cylinder, 283, and 327 applications. The 409 cars actually had 300 pound springs unless it was in a station wagon and then a 400 pound spring was used. Ride heights also varied. Front end weights all hovered around 2000 with a variance of 150 pounds up or down. The s-84 spring from Global West Suspension is a mild increase over the station wagon springs. It is designed to lower the car one on the lighter front ends and could drop an extra quarter of an inch on heavy front end models. Global West lowered the front end down this distance to get the front suspension sitting at its best geometry. Include the Global West control arm package and the front end starts to work, not to mention the power steering system Global West also came up that repair the factory bump steer problem.
https://www.globalwest.netimpala-elcamino-biscayne-1958-1959-1960-1961-1962-1963-1964-front-big-block-springs.html
$194.00
The s-84 spring from Global West Suspension is a mild increase over the station wagon springs. It is designed to lower the car one on the lighter front ends and could drop an extra quarter of an inch on heavy front end models.
We lowered the front end down this distance to get the front suspension sitting at its best geometry. Include the Global West control arm package and the front end starts to work, not to mention our power steering system that repairs the factory bump steer problem.
Note: The big block spring can be used on small block applications if you are looking for more performance handling.
Additional Information:
Heavier rate springs (normally called "big block" springs) for Impala, El Camino, and Biscayne for 1958, 1959, 1960, 1961, 1962, 1963, and 1964 models had a rate for 400 pounds per inch. The heavier rate really was not about the engine size but more the type of body. The 400 pounds springs were standard on all 1958 models and then changed to just being available on station wagons from 1959-64.
The four different rates most used are 300, 325, 375, and 400 pounds. All station wagon springs were rated at 400 pounds per inch and surprisingly all 58 models had 400 pound springs. The 1959 Impala and newer generally had 300 pound springs while Biscayne and Belair came in with 325 and 375. These rates were used for 6 cylinder, 283, and 327 applications. The 409 cars actually had 300 pound springs unless it was in a station wagon and then a 400 pound spring was used. Ride heights also varied. Front end weights all hovered around 2000 with a variance of 150 pounds up or down.
The s-84 spring from Global West Suspension is a mild increase over the station wagon springs. It is designed to lower the car one on the lighter front ends and could drop an extra quarter of an inch on heavy front end models. Global West lowered the front end down this distance to get the front suspension sitting at its best geometry. Include the Global West control arm package and the front end starts to work, not to mention the power steering system Global West also came up that repair the factory bump steer problem.
We lowered the front end down this distance to get the front suspension sitting at its best geometry. Include the Global West control arm package and the front end starts to work, not to mention our power steering system that repairs the factory bump steer problem.
Note: The big block spring can be used on small block applications if you are looking for more performance handling.
Additional Information:
Heavier rate springs (normally called "big block" springs) for Impala, El Camino, and Biscayne for 1958, 1959, 1960, 1961, 1962, 1963, and 1964 models had a rate for 400 pounds per inch. The heavier rate really was not about the engine size but more the type of body. The 400 pounds springs were standard on all 1958 models and then changed to just being available on station wagons from 1959-64.
The four different rates most used are 300, 325, 375, and 400 pounds. All station wagon springs were rated at 400 pounds per inch and surprisingly all 58 models had 400 pound springs. The 1959 Impala and newer generally had 300 pound springs while Biscayne and Belair came in with 325 and 375. These rates were used for 6 cylinder, 283, and 327 applications. The 409 cars actually had 300 pound springs unless it was in a station wagon and then a 400 pound spring was used. Ride heights also varied. Front end weights all hovered around 2000 with a variance of 150 pounds up or down.
The s-84 spring from Global West Suspension is a mild increase over the station wagon springs. It is designed to lower the car one on the lighter front ends and could drop an extra quarter of an inch on heavy front end models. Global West lowered the front end down this distance to get the front suspension sitting at its best geometry. Include the Global West control arm package and the front end starts to work, not to mention the power steering system Global West also came up that repair the factory bump steer problem.
1958-1964 Impala, El, Camino, Biscayne Front Big Block Springs Part # S-84 (Sold as a Pair)
Product Description
The s-84 spring from Global West Suspension is a mild increase over the station wagon springs. It is designed to lower the car one on the lighter front ends and could drop an extra quarter of an inch on heavy front end models.
We lowered the front end down this distance to get the front suspension sitting at its best geometry. Include the Global West control arm package and the front end starts to work, not to mention our power steering system that repairs the factory bump steer problem.
Note: The big block spring can be used on small block applications if you are looking for more performance handling.
Additional Information:
Heavier rate springs (normally called "big block" springs) for Impala, El Camino, and Biscayne for 1958, 1959, 1960, 1961, 1962, 1963, and 1964 models had a rate for 400 pounds per inch. The heavier rate really was not about the engine size but more the type of body. The 400 pounds springs were standard on all 1958 models and then changed to just being available on station wagons from 1959-64.
The four different rates most used are 300, 325, 375, and 400 pounds. All station wagon springs were rated at 400 pounds per inch and surprisingly all 58 models had 400 pound springs. The 1959 Impala and newer generally had 300 pound springs while Biscayne and Belair came in with 325 and 375. These rates were used for 6 cylinder, 283, and 327 applications. The 409 cars actually had 300 pound springs unless it was in a station wagon and then a 400 pound spring was used. Ride heights also varied. Front end weights all hovered around 2000 with a variance of 150 pounds up or down.
The s-84 spring from Global West Suspension is a mild increase over the station wagon springs. It is designed to lower the car one on the lighter front ends and could drop an extra quarter of an inch on heavy front end models. Global West lowered the front end down this distance to get the front suspension sitting at its best geometry. Include the Global West control arm package and the front end starts to work, not to mention the power steering system Global West also came up that repair the factory bump steer problem.
We lowered the front end down this distance to get the front suspension sitting at its best geometry. Include the Global West control arm package and the front end starts to work, not to mention our power steering system that repairs the factory bump steer problem.
Note: The big block spring can be used on small block applications if you are looking for more performance handling.
Additional Information:
Heavier rate springs (normally called "big block" springs) for Impala, El Camino, and Biscayne for 1958, 1959, 1960, 1961, 1962, 1963, and 1964 models had a rate for 400 pounds per inch. The heavier rate really was not about the engine size but more the type of body. The 400 pounds springs were standard on all 1958 models and then changed to just being available on station wagons from 1959-64.
The four different rates most used are 300, 325, 375, and 400 pounds. All station wagon springs were rated at 400 pounds per inch and surprisingly all 58 models had 400 pound springs. The 1959 Impala and newer generally had 300 pound springs while Biscayne and Belair came in with 325 and 375. These rates were used for 6 cylinder, 283, and 327 applications. The 409 cars actually had 300 pound springs unless it was in a station wagon and then a 400 pound spring was used. Ride heights also varied. Front end weights all hovered around 2000 with a variance of 150 pounds up or down.
The s-84 spring from Global West Suspension is a mild increase over the station wagon springs. It is designed to lower the car one on the lighter front ends and could drop an extra quarter of an inch on heavy front end models. Global West lowered the front end down this distance to get the front suspension sitting at its best geometry. Include the Global West control arm package and the front end starts to work, not to mention the power steering system Global West also came up that repair the factory bump steer problem.
- 1958-1964 Front Impala Coilover Kits
- 1958-1964 Rear Impala Coilover Kits
- QA1 Lower Bearing Shock Mount for Global West Extended Travel Control Arms part# EXTQ-001
- Viking Lower Bearing Shock Mount for Global West Extended Travel Control Arms part# EXTV-001
- 4002 Thrust Bearing Kit for Coil-Overs- part # 4002
- 1958-64 Impala Front Shock Mount Frame Upgrade part# W-5864
- Impala Rear Shock Crossmember 58-64
- 1958-1964 Impala, El, Camino, Biscayne Front Big Block Springs Part # S-84 (Sold as a Pair)
- 1958-1964 Impala, El Camino, Biscayne Front Small Block Springs Part# S-83 (Sold as a Pair)
- View All
Copyright © 2022 Global West Suspension Components Inc.