Stock Lower Control Arm Aluminum Bushing Lower Control Arm Bushing Chevelle, El Camino, Malibu, Monte Carlo 1967-1972 Part #1013

The 1013 kit for Chevelle, El Camino, Malibu and other A-bodies fit 1967, 1968, 1969, 1970, 1971 and 1972 lower a-arms. The bushings are a direct replace. Simply remove the rubber bushings from the stock arm and press the new Del-a-lum bushing in.

Note: There are 3 different lower control arms for 1964-72 models. You have two round style lower arms. Round style refers to the two bushings that are pressed into the control arm. Both bushings will be round. The third design has one round and the other is oval. This arm was the replacement control arm from GM. Global West only manufactures the Del-a-lum bushings for round style arms so you must check your car before ordering. It is best to check both sides because one could have been replaced at one time and it would be a oval type.

To determine if the 1013 is the right bushing kit for your arms. The small bushing measure in between the control arm stamped area will read about 1 3/8 inch diameter. The other in the arm will measure about 1 5/8 inch diameter. If your arm measures 1 5/8 inch diameter and the other measures 1 15/16 inch diameter, you have a earlier arm (1964-66) then part number will be 1011.

The YouTube video above provides good information about how the Del-a-lum bushing works.