1964-69 Mustang,Falcon, 13 inch disc brake conversion - part # c5f-6466-13-6
Home
Ford-Mercury
Falcon 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1969, 1969, 1970, 1971 
1964-69 Mustang,Falcon, 13 inch disc brake conversion - part # c5f-6466-13-6
Ranchero 1963, 1964, 1965
1964-69 Mustang,Falcon, 13 inch disc brake conversion - part # c5f-6466-13-6
In addition to offering road race and autocross suspension packages, we at Global West also can up with a 13 inch disk brake kit. The combination of our hubs, brackets and a few Wilwood components make this a great big brake package that is affordable and best of all does not move the wheel out into the fender. This package is used on the street as well as road race applications. The kit consists of special billet hubs, bearings and seals, hub centric bell hats, 13 inch rotors, billet aluminum caliper mounting brackets, Wilwood 6 piston radial mount calipers, pads, braided steel brake lines, and hardware. The kit will fit on 1964-69 8 cylinder Mustang drum brake spindles and if you have the old stock Kelsey Hayes 4 piston disc brake, it will replace that too. No spindle modifications are required.
A change to the kit from the photo above is that the rotors are black.
Note: This kit will require 17-inch wheels or larger.
http://www.globalwest.netc5f-6466-13-6.html
$1,998.75
In addition to offering road race and autocross suspension packages, we at Global West also can up with a 13 inch disk brake kit. The combination of our hubs, brackets and a few Wilwood components make this a great big brake package that is affordable and best of all does not move the wheel out into the fender. This package is used on the street as well as road race applications. The kit consists of special billet hubs, bearings and seals, hub centric bell hats, 13 inch rotors, billet aluminum caliper mounting brackets, Wilwood 6 piston radial mount calipers, pads, braided steel brake lines, and hardware. The kit will fit on 1964-69 8 cylinder Mustang drum brake spindles and if you have the old stock Kelsey Hayes 4 piston disc brake, it will replace that too. No spindle modifications are required.
A change to the kit from the photo above is that the rotors are black.
Note: This kit will require 17-inch wheels or larger.
1964-69 Mustang,Falcon, 13 inch disc brake conversion - part # c5f-6466-13-6
In addition to offering road race and autocross suspension packages, we at Global West also can up with a 13 inch disk brake kit. The combination of our hubs, brackets and a few Wilwood components make this a great big brake package that is affordable and best of all does not move the wheel out into the fender. This package is used on the street as well as road race applications. The kit consists of special billet hubs, bearings and seals, hub centric bell hats, 13 inch rotors, billet aluminum caliper mounting brackets, Wilwood 6 piston radial mount calipers, pads, braided steel brake lines, and hardware. The kit will fit on 1964-69 8 cylinder Mustang drum brake spindles and if you have the old stock Kelsey Hayes 4 piston disc brake, it will replace that too. No spindle modifications are required.
A change to the kit from the photo above is that the rotors are black.
Note: This kit will require 17-inch wheels or larger.
The master cylinder should be a 7/8 bore if you are going manual. If you are going power you should use a 15/16 or 1 inch.
I would also recommend an adjustable proportioning valve and if you are using drum brakes in the rear you will need a 2 pound pressure valve.