Toll Free 1 (877) 470-2975
Tubular Tie Rod Adjustable Sleeve Part #ADJ-5
Front Suspension
Tubular Tie Rod Adjustable Sleeve Part #ADJ-5
Tubular tie rod adjusting sleeves are commonly used for performance applications. They provide a 360 degree, full-thread engagement around the inner and outer tie rod threads. They are locked in position with jam nuts. When tightened, the jam nuts stop the sleeve from rotating. Use an open-end wrench to turn the sleeve for adjustments. Unlike the factory sleeves, no special tools are required to adjust them. They won’t come loose when tightened correctly and they help prevent any dirt or water from collecting in the thread which can impair adjustments. Why do you need tubular sleeves? Tubular sleeves are needed mainly when hard cornering, the load on the steering linkage is high. Global West has seen factory sleeves loosen at the clamp. This damages the threads in the sleeve and allows the alignment toe setting to change. Tubular sleeves engage along the entire sleeve giving the best holding ability and reducing any chance of thread slippage. ⋄ Strength ⋄ Easy adjustment ⋄ No special tools required ⋄ Longevity ⋄ Steel construction
https://www.globalwest.netadj-5.html
$62.65
Tubular tie rod adjusting sleeves are commonly used for performance applications. They provide a 360 degree, full-thread engagement around the inner and outer tie rod threads. They are locked in position with jam nuts. When tightened, the jam nuts stop the sleeve from rotating. Use an open-end wrench to turn the sleeve for adjustments.
Unlike the factory sleeves, no special tools are required to adjust them. They won’t come loose when tightened correctly and they help prevent any dirt or water from collecting in the thread which can impair adjustments.
Why do you need tubular sleeves? Tubular sleeves are needed mainly when hard cornering, the load on the steering linkage is high. Global West has seen factory sleeves loosen at the clamp. This damages the threads in the sleeve and allows the alignment toe setting to change. Tubular sleeves engage along the entire sleeve giving the best holding ability and reducing any chance of thread slippage.
⋄ Strength ⋄ Easy adjustment ⋄ No special tools required ⋄ Longevity ⋄ Steel construction
Unlike the factory sleeves, no special tools are required to adjust them. They won’t come loose when tightened correctly and they help prevent any dirt or water from collecting in the thread which can impair adjustments.
Why do you need tubular sleeves? Tubular sleeves are needed mainly when hard cornering, the load on the steering linkage is high. Global West has seen factory sleeves loosen at the clamp. This damages the threads in the sleeve and allows the alignment toe setting to change. Tubular sleeves engage along the entire sleeve giving the best holding ability and reducing any chance of thread slippage.
⋄ Strength ⋄ Easy adjustment ⋄ No special tools required ⋄ Longevity ⋄ Steel construction
Tubular Tie Rod Adjustable Sleeve Part #ADJ-5
Product Description
Tubular tie rod adjusting sleeves are commonly used for performance applications. They provide a 360 degree, full-thread engagement around the inner and outer tie rod threads. They are locked in position with jam nuts. When tightened, the jam nuts stop the sleeve from rotating. Use an open-end wrench to turn the sleeve for adjustments.
Unlike the factory sleeves, no special tools are required to adjust them. They won’t come loose when tightened correctly and they help prevent any dirt or water from collecting in the thread which can impair adjustments.
Why do you need tubular sleeves? Tubular sleeves are needed mainly when hard cornering, the load on the steering linkage is high. Global West has seen factory sleeves loosen at the clamp. This damages the threads in the sleeve and allows the alignment toe setting to change. Tubular sleeves engage along the entire sleeve giving the best holding ability and reducing any chance of thread slippage.
⋄ Strength ⋄ Easy adjustment ⋄ No special tools required ⋄ Longevity ⋄ Steel construction
Unlike the factory sleeves, no special tools are required to adjust them. They won’t come loose when tightened correctly and they help prevent any dirt or water from collecting in the thread which can impair adjustments.
Why do you need tubular sleeves? Tubular sleeves are needed mainly when hard cornering, the load on the steering linkage is high. Global West has seen factory sleeves loosen at the clamp. This damages the threads in the sleeve and allows the alignment toe setting to change. Tubular sleeves engage along the entire sleeve giving the best holding ability and reducing any chance of thread slippage.
⋄ Strength ⋄ Easy adjustment ⋄ No special tools required ⋄ Longevity ⋄ Steel construction
- Tubular Upper Control Arms with Del-A-Lum Bushings #CTA-88A (Chevelle, El Camino, Malibu, Monte Carlo 1978-1988)
- Tubular Lower Control Arms for Coil Springs (Del-A-Lum Bushings) part # CTA-22L
- Tubular Lower Control Arms for Coil-Over (Del-A-Lum Bushings) part # CTA-22H
- 1982-2002 S-10 Lower Control Arms (Extended Travel) #CTA-22EXT
- QA1 Lower Bearing Shock Mount for Global West Extended Travel Control Arms part# EXTQ-001
- Viking Lower Bearing Shock Mount for Global West Extended Travel Control Arms part# EXTV-001
- Bolt Kit for Lower Arms Only- part # 4006
- Upper Control Arm Offset Billet Shafts For GM G-Bodys Part # 704
- 1978-1988 G-body upper control arm billet shafts #714
- View All
Copyright © 2022 Global West Suspension Components Inc.