Toll Free 1 (877) 470-2975
Global West's 1958-1964 Impala Ft Coilover Kit for BB using QA1 Single Adj shocks
1958-1964 Front Impala Coilover Kits
Global West's 1958-1964 Impala Ft Coilover Kit for BB using QA1 Single Adj shocks
**Global West Suspensions does not recommend using any OEM lower control arm, not designed for coilover applications. We highly recommend using our control arms for coilover applications. Our lower control arms are designed and reinforced specifically to handle the load of a coilover.** Adjustable ride height kits for the 1958, 1959, 1960, 1961, 1962, 1963, 1964 Impala, Belair, and Biscayne is here. Global West designed up a conical wound spring that installs in the factory spring perch and tapers down to a 2.5 inch adjusting nut on a QA-1 threaded shock body. The spring is linear (not variable) that is slightly stiffer than stock and is capable of supporting a big block. Since the ride height is adjustable, even if you have a LS motor, you can still set the ride height to 1 1/2 inches below stock. The coilover kit can fit on top of the stock lower control arm but Global West recommends using the tubular lower control arm that is stronger than stock. The material supporting the shock on Global West arm is increased just to handle coilover applications.
- Lightweight Billet Aluminum Coil-Over Shocks
- Made in the USA
- Easy, Bolt-In Installation
- Ride Height Adjustable
- 100% Dyno Tested and Serialized
- Made in the USA
https://www.globalwest.net1958-1959-1960-1961-1962-1963-1964-impala-bel-air-biscayne-front-coilover-shocks-springs-big-block-s.html
$671.00
**Global West Suspensions does not recommend using any OEM lower control arm, not designed for coilover applications. We highly recommend using our control arms for coilover applications. Our lower control arms are designed and reinforced specifically to handle the load of a coilover.**
Adjustable ride height kits for the 1958, 1959, 1960, 1961, 1962, 1963, 1964 Impala, Belair, and Biscayne is here.
Global West designed up a conical wound spring that installs in the factory spring perch and tapers down to a 2.5 inch adjusting nut on a QA-1 threaded shock body. The spring is linear (not variable) that is slightly stiffer than stock and is capable of supporting a big block.
Since the ride height is adjustable, even if you have a LS motor, you can still set the ride height to 1 1/2 inches below stock.
The coilover kit can fit on top of the stock lower control arm but Global West recommends using the tubular lower control arm that is stronger than stock. The material supporting the shock on Global West arm is increased just to handle coilover applications.
Adjustable ride height kits for the 1958, 1959, 1960, 1961, 1962, 1963, 1964 Impala, Belair, and Biscayne is here.
Global West designed up a conical wound spring that installs in the factory spring perch and tapers down to a 2.5 inch adjusting nut on a QA-1 threaded shock body. The spring is linear (not variable) that is slightly stiffer than stock and is capable of supporting a big block.
Since the ride height is adjustable, even if you have a LS motor, you can still set the ride height to 1 1/2 inches below stock.
The coilover kit can fit on top of the stock lower control arm but Global West recommends using the tubular lower control arm that is stronger than stock. The material supporting the shock on Global West arm is increased just to handle coilover applications.
- Lightweight Billet Aluminum Coil-Over Shocks
- Made in the USA
- Easy, Bolt-In Installation
- Ride Height Adjustable
- 100% Dyno Tested and Serialized
- Made in the USA
Global West's 1958-1964 Impala Ft Coilover Kit for BB using QA1 Single Adj shocks
Product Description
**Global West Suspensions does not recommend using any OEM lower control arm, not designed for coilover applications. We highly recommend using our control arms for coilover applications. Our lower control arms are designed and reinforced specifically to handle the load of a coilover.**
Adjustable ride height kits for the 1958, 1959, 1960, 1961, 1962, 1963, 1964 Impala, Belair, and Biscayne is here.
Global West designed up a conical wound spring that installs in the factory spring perch and tapers down to a 2.5 inch adjusting nut on a QA-1 threaded shock body. The spring is linear (not variable) that is slightly stiffer than stock and is capable of supporting a big block.
Since the ride height is adjustable, even if you have a LS motor, you can still set the ride height to 1 1/2 inches below stock.
The coilover kit can fit on top of the stock lower control arm but Global West recommends using the tubular lower control arm that is stronger than stock. The material supporting the shock on Global West arm is increased just to handle coilover applications.
Adjustable ride height kits for the 1958, 1959, 1960, 1961, 1962, 1963, 1964 Impala, Belair, and Biscayne is here.
Global West designed up a conical wound spring that installs in the factory spring perch and tapers down to a 2.5 inch adjusting nut on a QA-1 threaded shock body. The spring is linear (not variable) that is slightly stiffer than stock and is capable of supporting a big block.
Since the ride height is adjustable, even if you have a LS motor, you can still set the ride height to 1 1/2 inches below stock.
The coilover kit can fit on top of the stock lower control arm but Global West recommends using the tubular lower control arm that is stronger than stock. The material supporting the shock on Global West arm is increased just to handle coilover applications.
- Lightweight Billet Aluminum Coil-Over Shocks
- Made in the USA
- Easy, Bolt-In Installation
- Ride Height Adjustable
- 100% Dyno Tested and Serialized
- Made in the USA
- Global West's 1958-1964 Impala Ft Coilover Kit for BB using QA1 Single Adj shocks
- Global West's 1958-1964 Impala Front Coilover Kit for SB using QA1 Single Adj shocks
- Global West's 1958-1964 Impala Ft Coilover kit for Sb using QA-1 double adj shocks
- 1958-1964 Impala Front Coilover Kit for Big Block using qa-1 shocks Part # GWS-5864QB
- 1958-1964 Impala Front Coilover Kit Small block coilover kit Part# GWS-5864V
- Global West's 58-64 Impala front coilover double adj Big Block Coilover Kit Part# GWS-5864VB
Copyright © 2022 Global West Suspension Components Inc.