655 South Lincoln Ave San Bernardino Ca. 92408 |
Del-a-lum Suspension Bushings
| Front performance control arm bushings:
(Del-a-lum suspension bushings)
Del-a-lum (pronounced della-loom) suspension bushings achieve unquestioned
suspension control that Del-A-lum bushings are approved for all NHRA classes including stock. What is a Del-a-Lum bushing? The outer portion of the bushing is an aluminum housing. The aluminum housing is machined with grease groves and has provision for a grease fitting. The bushing presses into the control arm similar to that of a factory bushing. The internal part of the bushing has a plastic rotating sleeve. The sleeve provides isolation between the steel pin and /or shaft (depending on location). The sleeve also acts as a bearing surface for the control arm to pivot on. Each side of the bushing has additional plastic thrust washers backed by steel thrust washers. The thrust washers are separate from the internal sleeve and provide fore and aft control. A grease fitting is employed with each bushing so full lubrication is achieved. Del-alum bushings do not squeak or make noise. They are exclusive with Global West. The Del-a-Lum bushings are also approved for several racing associations including NHRA. We manufacture them for several companies including one of the majors.
Del-A-Lum Control Arm Bushing are manufactured and
distributed by |
Del-a-lum
bushings provide :
|