655 South Lincoln Ave San Bernardino Ca. 92408
Toll Free 877-470-2975 Fax 909-890-0703

Part # 704 ------- Offset upper control arm shaft

704 shafts fit the following applications:

1978-88 Chevelle, Malibu, El Camino,
1982-02 S-10, Blazer 2 wheel dr
1978-88 Century, Regal, Grand National,
1978-88 Olds 442, Cutlass,
1978-88 Lemans, GTO, Tempest, Grand prix
1982-86 Bonneville
The offset shaft will fit stock control arms using standard type bushings for the stock arm. This includes rubber, polyurethane, and Global West Del-a-Lum bushings.

The purpose of using an offset shaft is for obtaining a proper alignment because of one of the following reasons:

  • Bent frame
  • Excessively lowered or raised
  • Sagging frame
  • Performance Alignment

Drag racing

Road racing

Performance street

Generally speaking for all applications: When installing offset shafts--- install the offset so the tire will be pushed out of the fender, away from the motor.

Except on road racing applications.

 

Note: The shaft on the left is a straight shaft (standard)

The shaft on the right is offset #704. The offset shows a
shift to the left. That should be towards the wheel.

Return to instruction sheet home page.