655 South Lincoln Ave San Bernardino Ca. 92408
Toll Free 877-470-2975 Fax 909-890-0703

1965-70 Impala, Caprice, Biscayne, Belair
Front tubular lower control arms

Assembled ready to go---our new replacement tubular lower control arm for 1965-70 Impala, Caprice, Biscayne, Belair. No matter if you have drum or disc brakes  Part # CTA-50L installs with no modifications. The arm is powder coated black and has the following features:

• Uses stock ball joints

• Has a polyurethane rotating spring cushion
  (The rotating spring cushion allows the spring to index in the frame as well as the lower arm whether you have trimmed the spring or not).

• A Teflon lined spherical bearing is employed for holding the control arm to the frame rather than a rubber bushing. We use a spherical bearing in this application because the bearing allows the arm to pivot without resistance. This reduces the twisting load on the eccentric that holds the lower arm to the frame. The result will be less chance of the alignment going out of adjustment.

• Built in steering stop

• Sway bar attachment point

The lower arms are made out of 2 inch and 1-1/4 inch diameter roll cage tubing. The arms are Heliarc (tig) welded at the strategic points and Mig welded at various locations added in additional supports. Above all
CTA-50L is a direct replacement.

Part # CTA-50L --- $749.00 pr

View instruction sheets.

Return to 65-70 Impala Home page.