|
655 South Lincoln Ave /
San Bernardino Ca. 92408
Phone: Toll Free 1-877-470-2975
Fax: 909-890-0703
Subframe Connectors:
Subframe connectors are a important upgrade for your pony car. Subframes
add additional support to the chassis by reducing flex. This increases load
transfer from front to rear or corner to corner depending on your application.
They also improve the integrity of the the uni-body.
Benefits and Features:
- Global West Subframes are constructed of 1-5/8 diameter seamless .125 wall
inch roll cage tubing with 3/16 mounting plates.
- Most applications do not affect ground clearance.
- Subframes are long and tie into the strongest area of the chassis.
- Will not interfere with exhaust. (Excluding side exhaust).
- Installation will not require the floor pan to be cut.
- Because subframes are weld on units and not bolt on, chassis rigidity is
increased.
- Powder coated finish.
- Easy installation.
The following subframes are available from Global West.
Mustang 1964-66 non-convertible
/
Part # 910 ---- $ 164.12
----
one kit per car |
|
Mustang 1964-66 convertible
/
Part # 910C ---- $ 164.12 ----
one kit per car
 |
| Mustang 1964-66
Outer rocker rail support
kits / Part # 923 --- $113.13 ---- one kit per
car
 |
| Mustang / Cougar 1967-73 non-convertible
/
Part # 911 ---- $ 164.12 ----
one kit per car
 |
Mustang / Cougar1967-73 convertible
/
Part # 911C ---- $ 164.12 ----
one kit per car |
| Mustang 1967-70
Outer rocker rail support
kits / Part # 924 --- $113.13 ---- one kit per
car
 |
| 1961-65 Falcon and 1963-65
Ranchero ---- (will fit Falcon convertibles) ---Part # 916
----$189.00 --- one kit per car.
|
Note: A small amount of ground clearance will be lost when
convertible subframes are used. We prefer
not to cut the additional floor pan that the factory installed. Therefore our subframe
butts up to it and that
is why a small amount of ground clearance is lost.
Return to
Mustang home page.
Return to Global West home page. |