1964-72 Chevelle, GTO, A-body tall spindle disc brake conversions.

655 South Lincoln Ave / San Bernardino Ca. 92408
Phone: Toll Free 1-877-470-2975 / Fax 909-890-0703

The disc brake kit featured below is a tall spindle conversion that is part of the negative roll geometry kit. It requires our tubular upper control arm CNR-42A or AP, a lower ball joint and outer tie rod change. Tubular lower control arms are available and are supplied with the correct ball joint. Part# CNR-42L or LP. Lower control arms excepting coilover shocks and springs are also available Part # CNR-42H or CNR-42HP. The negative roll system is by far the best handling package for 1964-72 A-bodies.

Part # DB-1812 is shipped pre-assembled complete with braided steel brake lines.

The 12 inch disc conversion will fit 15 inch wheels.

12-inch Disc brake kit with new
spindles:
Kit Contains:
2-New spindles
2-Inner wheel bearings/races
2-Outer wheel bearings/races
2-Inner seals
2-Brake calipers
2-(1-LE rotors) with correct studs
2-Spindle nuts
2-Spindle washers
2-Hub bearing
2-Dust caps
1-Set of front pads
2-Brake hoses
2-Banjo bolts and washers
2-Backing plates
Hardware

Part# DB-1812

$1208.50

Kits are shipped pre-assembled