|
655 South Lincoln Ave San Bernardino Ca. 92408
|
|
|
1959-64 Impala |
|
 TBC-94 (quite ride series)
|
Rear adjustable upper control arm Part # TBC-94 is an adjustable upper control arm with a rubber bushing on the rear end side and a spherical bearing on the frame side. The arm allows you to adjust pinion angle without using the old style shims. The arm is powder coated black and is supplied with new hardware. The spherical bearing swivels and allows for the twisting action of the arm when the rear end goes over bumps and as the chassis rolls. This reduces the load on the frame bracket and frame cross member.
Part # TBC-94 --- $174.90
|
 TBC-95 double bearing |
Rear adjustable double bearing upper control arm Part # TBC-95. TBC-95 is an adjustable upper control arm with a spherical bearing on both sides of the control arm. The arm allows you to adjust pinion angle without using the old style shims. The arm is powder coated black and is supplied with new hardware. This type of upper control arm would be used with high horsepower cars either on the street or for a drag race application. No lubrication is required, the bearing are Teflon lined. Note: By using a double bearing upper control arm additional side loads are reduced on the frame and rear end brackets. Part # TBC-95 -- $208.95 |
