1964-1973 Mustang 1/2" Front Spring Spacer Part# 2011 (one per box)

A quick and inexpensive way of lifting your car is by using a coil spring spacer. The spacers are installed between the coil spring and the shock tower, not in between the coils. The car will raise twice the height of the spacer. Therefore this 1/2 inch spacer equals about 1 inch of ride height change at the wheel. The spacer sits on top of the spring and does not change the spring rate. It simply raises the car.

Reasons to lift the car:

• To raise ride height if it is too low
• To level the car if it tilts to one side
• For weight jacking if the car is being raced

We offer three different sizes of polyurethane spacers for lifting the car:

• 1/2 inch spacer = approximate 1 inch ride height change
• 3/4 spacer = approximate 1-1/2 inch ride height change
• 1 inch spacer = approximate 2 inch raise